Wired PIR Sensor Dual Passive Infrared Motion Detector Hard Wired for Existing Home Alam System or Occupancy Sensor

Add your review

$14.49

$14.49


Note: Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to your order. As an Amazon Associate, we earn from qualifying purchases.
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare



The dual passive infrared detector works according to detecting the infrared spectrum of the human body. When the human body moves within its detection range, the sensor can receive its heat source signal, and after it is processed by internal circuits and unique lenses, which can effectively prevent the pet from generating an alarm. It is widely used in banks, warehouses, homes etc.
Technical Parameters
Working Voltage: DC9-16V
Current Consumption: ≤25mA(DC 12V/hour)
Working Temperature: -10°C/+50°C(14°F/122°F)
Sensor Type: Dual pyroelectric infrared sensor
Pulse Count: first level, second level optional
Mount Method: wall mounted
Installation Height: about 2.2m
Detection Distance/Anti-pet Level: 10m/25kg
Detection Angle: 110°
Alarm Output: NC/NO optional, contact capacity DC28V, 80mA max
Tamper Switch: NC, no voltage output, contact capacity DC28V, 100mA max
Installation
Fix the detector bracket to the wall with screws first, then hang the detector. The recommended installation height is about 2.2m, and the detector should be at an angle of 6-12 degrees to the wall. The objects that can cause temperature changes like air conditioners, electric fans, refrigertators, ovens, windows should be avoided. Please avoid obstructing objects in front of the detector lens. When installing, be careful that the indicator light is above the lens in order to avoid the detection.

This product has a variety of unique self-test functions, automatic temperature compensation, anti high frequency interference and other functions, the experiment proves that the detector can work reliably under the high frequency interference of 20~1000mhz (such as mobile).
The circuit design adopts the pulse counting technology. P.COUNT selects the jump pin J1 for the pulse count, and selects to insert the first-stage pulse count for the general indoor environment. The selected one is the secondary pulse count for the harsh environment. The factory setting is one-stage pulse count.
The working voltage: DC 9-16V, mount method: wall Mounted, installation height: about 2.2m, detection distance: 32 feets(10m), detection angle: 110°, alarm output: NC/NO optional, the factory setting is NC, working temperature: -10°C~+50°C(14℉~122℉).
This product has the alarm output normally closed / normally open optional function, in order to facilitate the connection of different alarm host, the user can adjust the RELAY jump pin J2 on the PCB as needed. Select to insert N.C. (normally closed state), select to unplug N.O. (normally open state), the factory setting is N.C. (normally closed state).
This product has an optional LED on and off, the user can adjust the ELD jumper J3 on the PCB as needed. Select to plug in the LED light, select to unplug the LED off, the factory setting is LED light state.

8 reviews for Wired PIR Sensor Dual Passive Infrared Motion Detector Hard Wired for Existing Home Alam System or Occupancy Sensor

0.0 out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Don M. –

    ::thumbs-up::
    Does the job, works as intended. Great value for almost any hardwired motion sensor on an alarm sensor.

    Helpful(0) Unhelpful(0)You have already voted this
  2. ruths –

    Easy retrofit and excellent value.
    These Infrared Motion Detectors are an excellent replacement for the existing detectors that no longer worked on this particular hard wired alarm system. Although, they were not from the same manufacture, they worked seamlessly with existing equipment and made this retrofit successful.

    Helpful(0) Unhelpful(0)You have already voted this
  3. CommGuy –

    Decent basic level PIR
    Not only is this PIR fairly cheap, it also provides both NC/NO switch outputs (Normally Closed/Normally Open) which is selectable with a jumper. This allows use in not only typical home alarms (NC) but other projects as well. The range is much to be desired, I noticed that anything beyond 6ft the results were sporadic. But then again, I wasn’t expecting much for this price point.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Sharon –

    As described
    Good

    Helpful(0) Unhelpful(0)You have already voted this
  5. Mark Z. –

    Used, refurbished items sold.
    It does the job, however received used item with no manual accessories. Realized too late to return

    Helpful(0) Unhelpful(0)You have already voted this
  6. Matthew D. –

    Worked as described for a good price
    Very easy to install and came with clear instructions. I used them as occupancy sensors. I had them trigger a power pack relay for a lighting circuit. Although I had to add a timed relay because it only triggers a motion, it does not hold it closed. It is momentary.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Aaron –

    Simple, easy, value.
    It seems a bit inconsistent when it detects me walking past, but it will detect me at some point. The red light is good for testing, but looks weird in application. My 45lb dog does not set it off, which is good for my application.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Jonathan –

    Functions well
    The sensitivity is a *little* weak, but I needed one of these specifically to use with a haunted house prop controller and it works well for that given the ability to switch between NC and NO

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Wired PIR Sensor Dual Passive Infrared Motion Detector Hard Wired for Existing Home Alam System or Occupancy Sensor
    Wired PIR Sensor Dual Passive Infrared Motion Detector Hard Wired for Existing Home Alam System or Occupancy Sensor

    $14.49

    HomeTechZone — Smart Technology for Modern Homes!
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart